Product ID:DYNAX 32, 46, AND 68
MSDS Date:11/30/1998
FSC:9150
NIIN:01-087-3510
Status Code:A
MSDS Number: CLDVS

Emergency Phone: 812-522-8991

Info Phone: 812-522-8991

Preparer: MATT DIBBLE

Cage: JO480

Telephone: 812-522-8991

Cage: JO480

MIXTURE

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

SOLVENT DEWAXED HEAVY PARAFFINIC DISTILLATE. (COMPONENT OF

CAS: 64742-65-0

RTECS: PY8038500

HYDROTREATED HEAVY PARAFFINIC DISTILLATE. (COMPONENT OF

CAS: 64742-54-7

RTECS: PY8035500

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: LUBRICATING OILS ARE
GENERALLY CONSIDERED NO MORE THAN MINIMALLY IRRITATING TO THE EYES.
SKIN CONTACT: LUBRICATING OILS ARE GENERALLY CONSIDERED NO MORE
THAN MILDLY IRRITATING TO THE SKIN . PROLONGED AND REPEATED CONTACT
MAY RESULT IN VARIOUS SKIN DISORDERS SUCH AS DERMATITIS,
FOLLICULITIS OR OIL ACNE. INHALATION: INHALATION OF VAPORS
(GENERATED AT HIGH TEMPERATURES ONLY) OR OIL MIST F ROM THIS
PRODUCT MAY RESULT IN MILD IRRITATION OF THE UPPER RESPIRATORY
TRACT. INGESTION: LUBRICATING OILS ARE GENERALLY CONSIDERED NO MORE
THAN SLIGHTLY TOXIC IF SWALLOWED. OTHER: NONE.
Effects of Overexposure:SEE HEALTH HAZARDS ACUTE AND CHRONIC.

First Aid:SKIN: WASH SKIN THOROUGHLY WITH SOAP AND WATER. REMOVE SOILED
CLOTHING. EYE: FLUSH WITH CLEAN LOW-PRESSURE WATER FOR AT LEAST 15
MINUTES. IF IRRITATION PERSISTS SEEK MEDICAL ATTENTION. INHALATION:
REM OVE FROM CONTAMINATED AREA. INGESTION: DO NOT INDUCE VOMITING,
SEEK MEDICAL ATTENTION. ADDITIONAL: IF ANY PROBLEMS OCCUR SEEK
MEDICAL ADVICE.

Flash Point:>215.6C, 420.F
Extinguishing Media:USE WATER FOG, DRY CHEMICAL OR CARBON DIOXIDE. DO
NOT USE WATER.
Fire Fighting Procedures:WEAR NIOSH-APPROVED SELF-CONTAINED BREATHING
APPARATUS WITH A FULL FACE-PIECE OPERATED IN THE POSITIVE PRESSURE
DEMAND MODE WHEN FIGHTING FIRES.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN RESIDUE) CAN IGNITE
EXPLOSIVELY.

Spill Release Procedures:LUBRICATING OIL MAY BURN, ALTHOUGH NOT READILY
IGNITABLE. USE CAUTION JUDGMENT WHEN CLEANING UP LARGE SPILLS.
LARGE SPILLS: WEAR RESPIRATOR AND PROTECTIVE CLOTHING AS
APPROPRIATE. SHUT OFF SOURCE OF L EAK IF SAFE TO DO SO. DIKE AND
CONTAIN. REMOVE WITH VACUUM TRUCKS OR PUMP TO A STORAGE SALVAGE
VESSEL. SOAK UP RESIDUE WITH AN ABSORBENT SUCH AS CLAY, SAND ,
(HANDLING/STORAGE)

Handling and Storage Precautions:N/P. SPILL/RELEASE PROCEDURES
(CONT'D): OR OTHER SUITABLE MATERIAL AND DISPOSE. FLUSH AREA WITH
WATER TO REMOVE TRACE RESIDUE. SMALL SPILLS: TAKE UP WITH AN
ABSORBENT MATERIAL AND DISPOSE.
Other Precautions:CONTAINERS OF THIS MATERAIL MAY BE HAZARDOUS WHEN
EMPTIED. SINCE EMPTY CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR,
LIQUID, AND/OR SOLID), ALL HAZARD PRECAUTIONS GIVEN IN THE DATA
SHEET MUST BE OBSERVED .

Respiratory Protection:A NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THE
EXPOSURE OF CONCERN .
Ventilation:IF MIST IS GENERATED, LOCAL EXHAUST IS SUGGESTED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:NOT ESSENTIAL FOR HANDLING. USE ANSI APPROVED CHEMICAL
SAFETY (SUPP SAFETY)
Other Protective Equipment:EYEWASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . APRONS, ETC OF IMPERVIOUS MATERIAL IS SUGGESTED
(MFR).
Work Hygienic Practices:USE SOAP AND WATER TO REMOVE SOIL FROM SKIN.
NEVER USE GASOLINE, SOLVENTS OR HARSH ABRASIVE CLEANERS.
Supplemental Safety and Health
N/P. EYE PROTECTION (CONT'D): GOGGLES IF OIL IS SPRAYED.

Boiling Pt:>260.C, 500.F
Vapor Pres:<0.1 MM HG. @ 100F.
Vapor Density:<0.1 AIR=1
Spec Gravity:0.865-0.879. (H20=1)
Evaporation Rate & Reference:< ETHER (N-BUAC=1)
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:LIGHT YELLOW OIL. TYPICAL PETROLEUM ODOR.
Percent Volatiles by Volume:<0.04

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS. HAZARDOUS DECOMP PRODUCTS (CONT'D): UNDERGOES
PYROLYSIS OR COMBUSTION. CARBON MONOXIDE, HYDROGEN SULFIDE, AND
OTHER UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FORMED UPON COMBUSTION.
Stability Condition to Avoid:AVOID HEAT AND OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION PRODUCTS ARE
HIGHLY DEPENDENT ON THE COMBUSTION CONDITIONS. A COMPLEX MIXTURE OF
AIRBORNE SOLID, LIQUID, PARTICULATE AND GASES WILL EVOLVE WHEN THIS
MATERIAL (MATERIALS TO AVOID)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
LOCAL AND PROVINCIAL REGULATIONS.

Toxicological Information:NO DATA. OCCUPATIONAL EXPOSURE LIMITS LISTED
IN INGREDIENT SECTION ARE FOR MINERAL OIL MIST.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:NO DATA.

Transport Information:DOT INFORMATION - 49 CFR 172.101. DOT
DESCRIPTION: NOT REGULATED.

SARA Title III Information:SECTION 302 COMPONENTS - 40 CFR 355 APPENDIX
A: NONE. SECTIONS 311/312 HAZARD CLASS - 40 CFR 370.2: NONE.
SECTION 313 COMPONENTS - 40 CFR 372.65: NONE.
Federal Regulatory Information:TSCA (TOXIC SUBSTANCE CONTROL ACT)
STATUS: TSCA (UNITED STATES) THE INTENTIONAL INGREDIENTS OF THIS
PRODUCT ARE LISTED. CERCLA RQ - 40 CFR 302.4: NONE. RQ (REPORTABLE
QUANTITY) - 49 CFR 172.101: NOT A PPLICABLE. NOS COMPONENT: NONE.